Installation Steps:

1. Clean the Surface – Use a clean cloth with alcohol or a mild cleaner to remove dust, oil, or any residue from the installation area. Make sure the surface is completely dry.
2. Test Fit – Before removing the backing, position the accessory to check its alignment and fit.
3. Peel Off the Adhesive Backing – Carefully remove the protective film from the double-sided tape.
4. If the Temperature Is Below 15°C (59°F) – Use a hairdryer or heat gun on low heat to warm up the double-sided tape before application. This helps improve adhesion in colder environments.
5. Apply Firmly – Press the accessory firmly onto the surface and hold it in place for 2-3 minutes to ensure a secure bond.
6. Let It Set – Keep the installed area dry for the first 48 hours to allow the adhesive to fully bond.